FIBARO Flood Sensor

FIBARO Flood Sensor

FIBARO Flood Sensor is a universal, Z-Wave Plus compatible, flood and temperature sensor. The device can be powered using battery, 12/24V DC power supply or both. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller through opening a nC contact using the external power supply.

The device has built in temperature sensor that allows to monitor ambient temperature. FIBARO Flood Sensor is designed to be placed on the floor or mounted on a wall (in this case Flood Sensor probes should be extended using addition wire). The device has a built-in visual LED indicator and an acoustic alarm.

In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.

FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
Short Guide Manual Video

Product Description

Technical Data

compatible with any Z-Wave or Z-Wave+ Controller,
supports protected mode (Z-Wave network security mode) with AES-
128 encryption, may be connected to any alarm system (potential free output
terminal),
Z-wave operating frequency as 865.2MHz
extremely easy installation – simply put on a surface prone to flooding,
may be installed anywhere – flood sensor’s contacts extended
with a wire, battery or VDC powered. When connected to an external 12/24V DC
power source, the battery serves as an emergency power source,
theft protection – tilt or moving is reported to the Z-Wave network or
alarm system’s main controller,
two operating modes – flood/temperature sensor or just a
temperature sensor,
alarm is signalled by sound, visual indicator (LED diode) and Z-Wave.

Use Case

  1. FIBARO FLOOD SENSOR helps can be used to detect water overflow from tank, washing mashine, or open tap.
  2. FIBARO flood sensor sends command to the main controller (HC2/HCL), which can data can be used to trigering scenes like informing to the user through notification or turn the tap off.